Wetting Agent 1L – Wetter 600 Non-Ionic Surfactant 600g/L

Horticultural Sprays:

Add 10mL per 100L (or 2mL per 15L knapsack) of Reactor Wetter 600 to horticultural sprays unless they already contain a wetting agent.
For waxy-leaf plants, increase the rate to improve wetting.
Spray only until leaves are just wet—avoid over-spraying to prevent run-off and loss of effectiveness.

Weed Sprays:

Add Reactor Wetter 600 to post-emergence herbicides unless the product label says it already includes a wetting agent.
Use as directed on individual herbicide labels to avoid crop damage.
Spray leaves and stems until just wet. Over-spraying causes chemical run-off.
For hard-to-wet plants (e.g., waxy or hairy leaves), increase the rate for better results:
High Volume Spray: 12mL/100L
Low Volume Boom Spray: 60mL/100L
Misting Machines: 5mL/5L
Knapsack: 2mL/15L

Paraquat/Diquat Herbicides (e.g., Reglone, Gramoxone):
For maximum efficiency with these herbicides, use higher rates to ensure even coverage:
High Volume Spray: 200mL/100L
Boom Spray: 200mL/100L
Knapsack: 30mL/15L
Soil Residual Herbicides:
Add Reactor Wetter 600 to thoroughly wet foliage when applying soil-active herbicides (e.g., Diuron, Atrazine):
Rates vary between 125–500mL/100L, depending on the herbicide. Check product labels.

Fire Fighting:

Reactor Wetter 600 improves the wetting power of water for fire control and clean-up:
Water Tanker: 10mL/100L
Knapsack: 2mL/15L

General Usage Instructions:

Reactor Wetter 600 is a spray additive for fungicides, insecticides, and herbicides. It enhances efficiency by improving wetting and spray coverage.
Mixes easily with all water types and is safe for tender foliage if used correctly.
Spray only until leaves are just wet to avoid waste through run-off.

Mixing:

Add Reactor Wetter 600 directly to the spray tank with water. Do not mix with undiluted sprays containing other wetting agents.

Storage:

Keep out of reach of children.
Store in a cool, ventilated area, away from direct sunlight.

Safety Directions:

May irritate eyes and skin. Avoid contact.
Wear protective clothing (long sleeves, gloves, goggles) when handling.
Wash skin immediately with soap and water if contact occurs.
Wash hands and face thoroughly after use.

First Aid:

For poisoning, call a doctor or the Poisons Information Centre (Australia: 13 11 26).
If skin contact occurs, remove contaminated clothing and wash thoroughly.
Refer to the Safety Data Sheet (SDS) for more details.

Note: Always follow product labels and seek expert advice for specific applications.